The metameric effect of monolithic zirconias with varying yttrium ratios.

PURPOSE: To evaluate the metameric disparities among monolithic zirconia materials with differing yttrium compositions across various lighting conditions. MATERIALS AND METHODS: Thirty-six square-shaped zirconia samples measuring 10 × 10 × 0.5 mm were prepared from monolithic zirconia materials with three different yttrium contents. A 0.2 mm thick layer of polymerized dual-polymerizable self-adhesive resin cement was created using a silicone mold with the same dimensions as the prepared zirconia specimens. To evaluate metamerism, color measurements were conducted using a spectrophotometer device on a neutral gray background in a color measurement cabinet that offers four different illumination environments. All samples underwent aging by subjecting them to 10000 thermal cycles using a thermal cycle tester. Following thermal aging, color measurements were taken once more, and the data were recorded using the CIE L*, a*, b* color system. Two-way ANOVA and Post-hoc Bonferroni tests were employed to analyze the data. RESULTS: It was observed that there was no statistical difference among the color measurements made in different illumination environments of the monolithic zirconia ceramics used to evaluate metamerism (P > .05). This observation remained consistent both before and after thermal aging. After thermal aging, the color of monolithic zirconia materials exhibited a tendency towards red and yellow hues, accompanied by a decrease in brightness levels. CONCLUSION: It can be stated that different illumination conditions did not affect the metamerism of monolithic zirconia materials, but there was a color change in monolithic zirconia materials after a thermal aging period equivalent to one year.

Dimensional Stability of Additively Manufactured Diagnostic Maxillary Casts Fabricated with Different Model Resins.

PURPOSE: To evaluate the effect of model resin type and time interval on the dimensional stability of additively manufactured diagnostic casts. MATERIALS AND METHODS: Ten irreversible hydrocolloid impressions and 10 impressions from an intraoral scanner were made from a reference maxillary stone cast, which was also digitized with a laboratory scanner. Conventional impressions were poured in type III stone (SC), while digital impressions were used to additively manufacture casts with a nanographene-reinforced model resin (GP) or a model resin (DM). All casts were digitized with the same laboratory scanner 1 day (T0), 1 week (T1), 2 weeks (T2), 3 weeks (T3), and 4 weeks (T4) after fabrication. Cast scans were superimposed over the reference cast scan to evaluate dimensional stability. Data were analyzed with Bonferroni-corrected repeated measures ANOVA (α = .05). RESULTS: The interaction between the main factors (material type and time interval) affected anterior teeth deviations, while the individual main factors affected anterior teeth and entire-cast deviations (P ≤ .008). Within anterior teeth, DM had the lowest deviations at T3, and GP mostly had lower values at T2 and lower deviations at T3 than at T0 (P ≤ .041). SC had the highest pooled anterior teeth deviations, and GP had the highest pooled entire cast deviations (P < .001). T3 had lower pooled anterior teeth deviations than at T0, T1, and T4, and higher pooled entire cast deviations than T1 were demonstrated (P ≤ .027). CONCLUSIONS: The trueness of nanographene-reinforced casts was either similar to or higher than that of other casts. Dimensional changes were acceptable during the course of 1 month.

Effect of Hydrothermal Aging on the Flexural Strength and Microhardness of Materials Used for Additive or Subtractive Manufacturing of Definitive Restorations.

PURPOSE: To evaluate the flexural strength (FS) and microhardness of various CAD/CAM restorative materials intended for definitive use. The effect of hydrothermal aging on the mechanical properties of these materials was also investigated. MATERIALS AND METHODS: A total of 210 bar-shaped specimens (17 × 4 × 1.5 mm ± 0.02 mm) were fabricated via either subtractive manufacturing (SM) methods-reinforced composite resin (SM-CR), polymer-infiltrated ceramic network (SM-PICN), fine-structured feldspathic ceramic (SMFC), nanographene-reinforced polymethyl methacrylate (PMMA; SM-GPMMA), PMMAbased resin (SM-PMMA)-or additive manufacturing (AM) methods with urethane acrylate-based resins (AM-UA1 and AM-UA2). Specimens were then divided into two subgroups (nonaged or hydrothermal aging; n = 15). A three-point flexural strength test was performed, and five specimens from the nonaged group were submitted to microhardness testing. Specimens were subjected to 10,000 thermal cycles, and the measurements were repeated. RESULTS: Regardless of aging, SM-CR had the highest FS (P < .001), followed by SM-GPMMA (P ≤ .042). In nonaged groups, AM-UA2 had a lower FS than all other materials except SM-FC (P = 1.000). In hydrothermal aging groups, AM specimens had lower FS values than other materials, except SM-PMMA. With regard to microhardness, there was no significant difference found between any of the tested materials (P ≥ .945) in the nonaged and hydrothermal aging groups. CONCLUSIONS: The effect of hydrothermal aging on FS varied depending on the type of restorative material. Regardless of aging condition, SM-CR showed the highest FS values, whereas SM-FC had the highest microhardness. Hydrothermal aging had no significant influence on the microhardness of the tested materials.

Structural and Functional Impact of Adrenoceptor Beta-1 Gene Polymorphism in Patients with Hypertrophic Cardiomyopathy and Response to Beta-Blocker Therapy.

BACKGROUND: Hypertrophic cardiomyopathy (HCM) is a genetically inherited cardiac disorder with diverse clinical presentations. Adrenergic activity, primarily mediated through beta-adrenoceptors, plays a central role in the clinical course of HCM. Adrenergic stimulation increases cardiac contractility and heart rate through beta-1 adrenoceptor activation. Beta-blocker drugs are recommended as the primary treatment for symptomatic HCM patients to mitigate these effects. METHODS: This prospective study aimed to investigate the impact of common ADRB-1 gene polymorphisms, specifically serine-glycine at position 49 and arginine-glycine at position 389, on the clinical and structural aspects of HCM. Additionally, the study explored the association between these genetic variations and the response to beta-blocker therapy in HCM patients. RESULTS: A cohort of 147 HCM patients was enrolled, and comprehensive assessments were performed. The findings revealed that the Ser49Gly polymorphism significantly influenced ventricular ectopic beats, with beta-blocker therapy effectively reducing them in Ser49 homozygous patients. Moreover, natriuretic peptide levels decreased, particularly in Ser49 homozygotes, indicating improved cardiac function. Left ventricular outflow obstruction, a hallmark of HCM, was also reduced following beta-blocker treatment in all patient groups. In contrast, the Arg389Gly polymorphism did not significantly impact baseline parameters or beta-blocker response. CONCLUSION: These results emphasize the role of the Ser49Gly polymorphism in the ADRB-1 gene in shaping the clinical course and response to beta-blocker therapy in HCM patients. This insight may enable a more personalized approach to managing HCM by considering genetic factors in treatment decisions. Further research with larger populations and longer follow-up periods is needed to confirm and expand upon these findings.

Investigation of APE1 and OGG1 expression in chronic hemodialysis patients.

BACKGROUND: The role of DNA repair mechanisms is of significant importance in diseases characterized by elevated oxidative DNA damage, such as chronic kidney disease. It is imperative to thoroughly understand the functions of molecules associated with DNA repair mechanisms, not only for assessing susceptibility to diseases but also for monitoring disease progression. In this research, we investigated the APE1 and OGG1 gene expression levels, both of which are involved in the base excision repair (BER) mechanism in chronic hemodialysis patients with malignancy (HPM; n = 8) and without malignancy (HP; n = 36) in pre- and post-dialysis period and 37 healty persons. We also assessed how these values correlate with the clinical profiles of the patients. METHODS AND RESULTS: We conducted gene expression analysis using real-time polymerase chain reaction (qRT-PCR). No significant differences in APE1 gene expression levels were observed in pre-dialysis when comparing the HP and HPM groups to the control group. The expression levels of the OGG1 gene were significantly lower in both the HP and HPM groups in pre- and post-dialysis periods compared to the control group. Dialysis procedures led to a reduction in APE1 and OGG1 gene expression levels in both HP and HPM groups. CONCLUSIONS: The findings of our study elucidate the impact of alterations in the base excision repair (BER) mechanism, including the hemodialysis process, in end-stage renal disease (ESRD).

Are acromiohumeral distance measurements on conventional radiographs reliable? A prospective study of inter-method agreement with ultrasonography, and assessment of observer variability.

OBJECTIVES: This study aims to investigate the reliability of acromiohumeral distance (AHD) measurements using conventional radiographs and to compare non-standardized and standardized radiographs with intra-/interobserver reliability measurements. PATIENTS AND METHODS: Between February 2021 and January 2022, a total of 110 shoulders of 55 patients (25 males, 30 females; mean age: 49.7±12.6 years; range, 25 to 77 years) were included. Radiographs were taken in four different positions: primarily shoulder anteroposterior (AP), true AP, standardized true AP, and standardized outlet views. The AHD was measured by three orthopedists. A prospective ultrasonography (US) evaluation was performed by an experienced physiatrist, and the relationship between US and radiographic measurements was evaluated. The intra- and interobserver reliability of radiographic measurements was assessed. RESULTS: On the standardized true AP view measurements, all observers showed a moderate to good agreement with US measurements (intraclass correlation coefficients [ICC]: 0.68-0.75). There was no significant difference between the AHD measurements of the senior orthopedist on standardized true AP and outlet views, and the US measurements. The intraobserver agreement of US measurements was excellent (ICC: 0.98, 95% confidence interval [CI]: 0.98-0.99), and the intraobserver agreement level of measurements on radiographs were good to excellent with a wide range of ICC values (ICC: 0.79-0.97). Interobserver reliability was the highest on the standardized outlet view, with an ICC of 0.91 and 0.88 in two measurement times. Interobserver reliability of other measurements were good with ICC values ranging from 0.82 to 0.88. CONCLUSION: The AHD measurements on radiographs are compatible with US measurements within up to 2 mm difference if standardization is ensured. Also, measurements on standardized views have a superior consistency with lower standard error of measurement and minimal detectable change values. Therefore, we recommend using standardized true shoulder AP and standardized outlet radiographs in clinical practice and studies, as these are the most accurate in demonstrating true AHD.

Fabrication trueness, intaglio surface adaptation, and marginal integrity of resin-based onlay restorations fabricated by additive and subtractive manufacturing.

PURPOSE: To evaluate the fabrication trueness, intaglio surface adaptation, and marginal integrity of additively- or subtractively manufactured resin-based onlay restorations. MATERIALS AND METHODS: An onlay restoration was designed (Exocad Dental CAD Galway 3.0) and saved as standard tessellation language (STL) file to generate design STL file (DO-STL). By using this design, a total of 45 onlays were fabricated either with additive (3D-printed resin for definitive (Tera Harz TC-80DP, AM-D) and interim (Freeprint temp, AM-I) restorations) or subtractive manufacturing (composite resin, Tetric CAD (SM)) technologies. Onlays were scanned with an intraoral scanner (CEREC Primescan SW 5.2, Dentsply Sirona) and the scans were saved as test STL files (TO-STLs). For trueness evaluation, TO-STLs were superimposed over DO-STL, and root mean square (RMS) values of overall and intaglio surfaces were measured (Geomagic Control X). For the intaglio surface adaptation and marginal integrity, triple scan protocol was performed. Kolmogorov-Smirnov, one-way analysis of variance, and a post-hoc Tukey honestly significant difference test were used to analyze data(α=.05). RESULTS: RMS values of intaglio and overall surfaces, intaglio adaptation, and marginal integrity varied among test groups (P<0.001). AM-D had the greatest overall surface RMS (P <0.001), while SM had the greatest intaglio surface RMS (P<0.001). SM had the highest average distance deviations for intaglio surface adaptation and marginal integrity, whereas AM-D had the lowest (P <0.001). CONCLUSION: Additively manufactured definitive onlays showed lower overall trueness than additively manufactured interim onlays and subtractively manufactured definitive onlays. However, additively manufactured definitive onlays presented high intaglio surface trueness, intaglio surface adaptation, and marginal integrity.

Ulnar Nerve Management in Distal Humerus Fracture Surgery: A Case of Developing Ulnar Neuropathy After Open Reduction and Internal Fixation.

In this case report, we want to show how a patient who underwent surgery for a distal humerus fracture developed postoperative ulnar neuropathy symptoms, how nonunion persisted even at the ninth month of follow-up, and whether the nonunion was connected to the ulnar neuropathy that developed. Due to this, we used this case to explore ulnar nerve care and whether ulnar nerve transposition, manipulation, or decompression should be carried out during surgery on patients with distal humerus fractures. A 52-year-old man with a bi-columnar distal humerus fracture from a fall on his right elbow underwent open reduction and internal fixation at an external center one year before. Elbow restriction, discomfort, numbness, and weakness in the fourth and fifth digits of the right hand were all symptoms the patient experienced eight months following the surgery. We discovered the distal right humerus' nonunion during the radiological exams. It became apparent that the patient had no signs of ulnar neuropathy before the injury. In the eighth month following the injury, the patient had implant removal, open reduction internal fixation with autograft, and ulnar nerve transposition. We discovered during follow-up that the patient's ulnar neuropathy symptoms had subsided. The surgeon's familiarity with the procedure and command of the anatomy of the elbow has a role in managing the ulnar nerve in distal humerus fractures. We concluded that more study is required to determine the connection between the onset of ulnar neuropathy and nonunion while treating distal humerus fractures.

Trueness and precision of combined healing abutment scan body system scans at different sites of maxilla after multiple repositioning of the scan body.

OBJECTIVES: To evaluate the accuracy of the scans of the combined healing abutment-scan body (CHA-SB) system located at different sites of the maxilla when SBs are replaced in between each scan. METHODS: Three SBs were seated into HAs located at the central incisor, first premolar, and first molar sites of a maxillary model inside a phantom head, and the model was scanned extraorally (CEREC Primescan SW 5.2). This procedure was repeated with new SBs until a total of 10 scans were performed. Standard tessellation language files of CHA-SBs at each implant location were isolated, transferred into analysis software (Geomagic Control X), and superimposed over the proprietary library files to analyze surface (root mean square), linear, and angular deviations. Trueness and precision were evaluated with one-way analysis of variance and Tukey tests. The correlation between surface and angular deviations was analyzed with Pearson's correlation (α=0.05). RESULTS: Molar implant scans had the highest surface and angular deviations (P≤.006), while central incisor implant scans had higher precision (surface deviations) than premolar implant scans (P=.041). Premolar implant scans had higher accuracy than central incisor implant scans on the y-axis (P≤.029). Central incisor implant scans had the highest accuracy on the z-axis (P≤.018). A strong positive correlation was observed between surface and angular deviations (r = 0.864, P<.001). CONCLUSION: Central incisor implant scans mostly had high accuracy and molar implant scans mostly had lower trueness. SBs were mostly positioned apically; however, the effect of SB replacement can be considered small as measured deviations were similar to those in previous studies and the precision of scans was high. CLINICAL SIGNIFICANCE: Repositioning of scan bodies into healing abutments would be expected to result in similar single crown positioning regardless of the location of the implant, considering high scan precision with the healing abutment-scan body system. The duration of the chairside adjustments of crowns in the posterior maxilla may be longer than those in the anterior region.

Effect of internal connection type and screw channel angle on the screw stability of anterior implant-supported zirconia crowns.

OBJECTIVES: To investigate the effect of implant-abutment connection and screw channel angle on screw stability by comparing a newly introduced and an established connection, before and after cyclic loading. MATERIALS AND METHODS: Implants (N = 44) with Torcfit (TF) or Crossfit (CF) connection were divided to be restored with a straight (CFS and TFS) or an angled screw access channel (CFA and TFA) titanium-base abutment (n = 11). CFA and TFA received screw-retained crowns, whereas CFS and TFS received hybrid zirconia abutments and cement-retained crowns. The initial torque value (ITV) of each complex (ITVI ) and removal torque value (RTV) after 24 h (RTVI ) were measured. Screws were replaced with new ones, ITVs were recorded again (ITVF ), and crowns were cyclically loaded (2.4 million cycles, 98 N) to measure RTVs again (RTVF ). Percentage torque loss was calculated. Data were analyzed (α = 0.05). RESULTS: ITVs were similar among groups (p ≥ .089). CF led to higher RTVs (p ≤ .002), while CFS had higher RTVI than CFA (p = .023). After 24 h, CFS had lower percentage torque loss than TF, while CFA had lower percentage torque loss than TFA (p ≤ .011). After cyclic loading, CF led to lower percentage torque (p < .001). CONCLUSION: The implant-abutment connection affected the removal torque values. However, no screw loosening occurred during cyclic loading, which indicated a stable connection for all groups. Screw access channel angle did not affect screw stability after cyclic loading.

Investigation of XPD, miR-145 and miR-770 expression in patients with end-stage renal disease.

BACKGROUND: The effective maintenance of genome integrity and fidelity is vital for the normal function of our tissues and organs, and the prevention of diseases. DNA repair pathways maintain genome stability, and the adequacy of genes acting in these pathways is essential for disease suppression and direct treatment responses. Chronic kidney disease is characterized by high levels of genomic damage. In this study, we examined the expression levels of the xeroderma pigmentosum group D (XPD) gene, which plays a role in the nucleotide excision repair (NER) repair mechanism, and the expression levels of miR-145 and miR-770 genes, which play a role in the regulation of the expression of the XPD gene, in hemodialysis patients with (n = 42) and without malignancy (n = 9) in pre- and post-dialysis conditions. We also evaluated these values with the clinical findings of the patients. METHODS & RESULTS: Gene expression analysis was performed by real-time polymerase chain reaction (qRT-PCR). Compared to the individuals with normal kidney function (2.06 ± 0.32), the XPD gene expression was lower in the pre-dialysis condition both in hemodialysis patients without cancer (1.24 ± 0.18; p = 0.02) and in hemodialysis patients with cancer (0.82 ± 0.114; p = 0.001). On the other hand, we found that miR-145 and miR-770 expression levels were high in both groups. We also found that expression levels were affected by dialysis processes. A statistically significant positive correlation was found between miR-145 and mir770 expression levels in the pre-dialysis group of patients with (r=-0.988. p = 0.0001) and without (r=-0.934. p = 0.0001) malignancy. CONCLUSIONS: Studies on DNA damage repair in the kidney will help develop strategies to protect kidney function against kidney diseases.

The Long-Term Impact of Ionizing Radiation on DNA Damage in Patients Undergoing Multiple Cardiac Catheterizations.

Ionizing radiation (IR) exposures have increased exponentially in recent years due to the rise in diagnostic and therapeutic interventions. A number of small-scale studies investigated the long-term effect of IR on health workers or immediate effects of IR on patients undergoing catheterization procedures; however, the long-term impact of multiple cardiac catheterizations on DNA damage on a patient population is not known. In this study, the effects of IR on DNA damage, based on micronuclei (MN) frequency and 8-hydroxy-2'-deoxyguanosine (8-OHdG) as markers in peripheral lymphocytes, were evaluated in patients who previously underwent multiple cardiac catheterization procedures. Moreover, genetic polymorphisms in genes PARP1 Val762Ala, OGG1 Ser326Cys, and APE1 Asn148Glu as a measure of sensitivity to radiation exposure were also investigated in the same patient population. The patients who underwent ≥ 3 cardiac catheterization procedures revealed higher DNA injury in comparison to the patients who underwent ≤ 2 procedures, documented with the presence of higher level of MN frequency (6.4 ± 4.8 vs. 9.1 ± 4.3, p = 0.002) and elevated serum 8-OHdG levels (33.7 ± 3.8 ng/mL vs. 17.4 ± 1.9 ng/mL, p = 0.001). Besides, OGG1 Ser326Cys and APE1 Asn148Glu heterozygous and homozygous polymorphic types, which are related with DNA repair mechanisms, were significantly associated with MN frequency levels (p = 0.006 for heterozygous and p = 0.001 for homozygous with respect to OGG1 Ser326Cys, p = 0.007 for heterozygous and p = 0.001 for homozygous with respect to APE1 Asn148Glu). There was no significant difference in terms of PARP1 Val762Ala gene polymorphism between two groups.

Can a novel drug dose be used for T3 suppression test?

PURPOSE: This study aimed to investigate whether 25 µg/day dose of triiodothyronine (T3) can also suppress thyroid stimulating hormone (TSH) level, as well as the routine dose of 50-100 µg/day in T3 suppression test, which is used to the distinguish between resistance to thyroid hormone (RTH) and TSH secreting pituitary adenoma. METHODS: In this prospective study, 26 patients with genetically proven RTH were randomly divided into two groups: Group 1 comprised 13 patients who were administered 50-100 µg/day T3 for 3-9 days, while Group 2 also comprised 13 patients who were administered 25 µg/day T3 for 7 days for T3 suppression test. The two groups' responses to T3 suppression tests were compared. RESULTS: The comparison of the mean percentage changes in TSH values by the T3 suppression tests showed no significant differences between the groups, and a ≥80% decrease was detected in all patients. Nine patients in Group 1 and one patient in Group 2 reported that they had to use propranolol due to tachycardia developed during the test. CONCLUSION: As higher doses of T3 can increase the risk of severe tachycardia during T3 suppression test, a low dose with 25 mcg/day for a week appears to be safer and more useful.

Effect of Bioabsorbable Poly (dl-Lactide ε-Caprolactone) on Healing of Experimentally Injured Acute Traumatic Middle Ear Mucosa Damage.

BACKGROUND: Postoperative adhesion is an important complication after middle-ear surgeries. Although many materials have been tried to prevent this complication, the use of Poly (dl-lactide ε-caprolactone) as an anti-adhesive material after middle-ear surgery has not yet been reported. The aim of this study was to evaluate the anti-adhesive effect of poly (dl-lactide ε-caprolactone) on the ears of rats with middle-ear mucosa damage. METHODS: In our study, 14 Wistar albino rats and 28 ears in total were used. The rats were randomly divided into 4 groups. Middle ear mucosa damage was performed in all groups with a transcanal approach under otomicroscopy in sterile conditions. The effects of poly (dl-lactide ε-caprolactone), silicone sheet, and absorbable gelatin sponge were compared histologically with the secondary healing group. In addition, hearing evaluation was performed before the procedure and on the 28th postoperative day. RESULTS: No significant difference was observed in transient otoacoustic emission and distortion product otoacoustic emissions tests performed before and after the surgical procedure when the groups were compared. While adhesion was observed in the tympanic membrane in the absorbable gelatin sponge group, no adhesion was observed in the other groups. In the absorbable gelatin sponge group, increased fibroblastic activity, inflammation, and neovascularization were observed in the middle-ear mucosa. No significant difference was observed in silicone sheet, poly (dl-lactide ε-caprolactone), and control groups in terms of fibroblastic activity, inflammation, and neovascularization. CONCLUSION: It can be concluded that absorbable poly (dl-lactide ε-caprolactone) is nonototoxic and biocompatible with the rat's middle ear cavity by short-term evaluation.

Subacute THYROiditis Related to SARS-CoV-2 VAccine and Covid-19 (THYROVAC Study): A Multicenter Nationwide Study.

CONTEXT: The aims of the study are to compare characteristics of subacute thyroiditis (SAT) related to different etiologies, and to identify predictors of recurrence of SAT and incident hypothyroidism. METHODS: This nationwide, multicenter, retrospective cohort study included 53 endocrinology centers in Turkey. The study participants were divided into either COVID-19-related SAT (Cov-SAT), SARS-CoV-2 vaccine-related SAT (Vac-SAT), or control SAT (Cont-SAT) groups. RESULTS: Of the 811 patients, 258 (31.8%) were included in the Vac-SAT group, 98 (12.1%) in the Cov-SAT group, and 455 (56.1%) in the Cont-SAT group. No difference was found between the groups with regard to laboratory and imaging findings. SAT etiology was not an independent predictor of recurrence or hypothyroidism. In the entire cohort, steroid therapy requirement and younger age were statistically significant predictors for SAT recurrence. C-reactive protein measured during SAT onset, female sex, absence of antithyroid peroxidase (TPO) positivity, and absence of steroid therapy were statistically significant predictors of incident (early) hypothyroidism, irrespective of SAT etiology. On the other hand, probable predictors of established hypothyroidism differed from that of incident hypothyroidism. CONCLUSION: Since there is no difference in terms of follow-up parameters and outcomes, COVID-19- and SARS-CoV-2 vaccine-related SAT can be treated and followed up like classic SATs. Recurrence was determined by younger age and steroid therapy requirement. Steroid therapy independently predicts incident hypothyroidism that may sometimes be transient in overall SAT and is also associated with a lower risk of established hypothyroidism.

Expression of genes related to iron homeostasis in breast cancer.

BACKGROUND: The dysfunctions in the metabolism of iron have an important role in many pathological conditions, ranging from disease with iron deposition to cancer. Studies on malignant diseases of the breast reported irregular expression in genes associated with iron metabolism. The variations are related to findings that have prognostic significance. This study evaluated the relationship of the expression levels of transferrin receptor 1 (TFRC), iron regulatory protein 1 (IRP1), hepcidin (HAMP), ferroportin 1 (FPN1), hemojuvelin (HFE2), matriptase 2 (TMPRSS6), and miR-122 genes in the normal and malignant tissues of breast cancer patients. METHODS & RESULTS: The normal and malignant tissues from 75 women with breast malignancies were used in this study. The patients did not receive any treatment previously. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was used in figuring the levels of gene expression associated with iron metabolism. When the malignant and normal tissues gene expression levels were analyzed, expression of TFRC increased (1.586-fold); IRP1 (0.594 fold) and miR-122 (0.320 fold) expression decreased; HAMP, FPN1, HFE2, and TMPRSS6 expressions did not change. FPN1 and IRP1 had a positive association, and this association was statistically significant (r = 0.266; p = 0.022). IRP1 and miR-122 had a positive association, and this association had statistical significance (r = 0.231; p = 0.048). CONCLUSIONS: Our study portrayed the important association between genes involved in iron hemostasis and breast malignancy. The results could be used to establish new diagnostic techniques in the management of breast malignancies. The alterations in the metabolism of malignant breast cells with normal breast cells could be utilized to achieve advantages in treatment.

Middle-sized posterior malleolus fractures: Fixed versus non-fixed - A prospective randomized study.

PURPOSE: This study aimed to assess the impact of fixation on functional and radiological outcomes of ankle fractures involving the posterior malleolus. We hypothesized that fixation of the posterior malleolus would be associated with improved radiological and functional outcome. METHODS: A prospective randomized controlled study was planned and 40 consecutive ankle fractures involving middle-sized (10-25%) posterior fragment were included. Posterior fragments in Group 1 were not fixated while Group 2 underwent posterior malleolus fixation. The patients were evaluated both functionally and radiologically at minimum 2-years. RESULTS: Demographics and fracture type distributions were similar between the groups. Despite the slightly better functional outcome in Group 2, no significant functional or radiological outcome difference could be detected. Articular step-off> 1 mm was more common in Group 1 (p = 0.04) and the patients with articular step-off showed significantly worse functional outcome in all functional parameters (p < 0.05). Radiological and functional outcome parameters were positively correlated when all patients were evaluated together. Lateral radiographs caused an overestimation in the size of posterior fragment compared to CT (p < 0.001). CONCLUSION: Although there was a slightly better clinical outcome in patients with fixed posterior fragments, it was not significant at short to mid-term follow-up. However, posterior fragment fixation contributed to functional outcomes by decreasing the incidence of articular step-off> 1 mm, which was found to be a negative prognostic factor. LEVEL OF EVIDENCE: Level I; prospective randomized controlled study.

Diagnosis and Treatment Planning of Developmental Hip Dysplasia: Evaluation of Care Practices of the Members of the Turkish Pediatric Orthopedics Association.

OBJECTIVE: Developmental dysplasia of the hip is one of the most important causes of childhood disabilities. Although there are accepted treatment algorithms for developmental dysplasia of the hip, diagnosis and treatment approaches can show variations in the management among physicians. This study aimed to develop a diagnosis and treatment algorithm for developmental dysplasia of the hip according to the preferences of members of the Turkish Pediatric Orthopedics Association. MATERIALS AND METHODS: An interview by telephone call was made with 76 orthopedists (group 1: more experienced 39 physicians, group 2: less experienced 37 physicians) who are members of the Turkish Pediatric Orthopedics Association. Participants were q uesti onnai red ab out their demographic information, experiences, diagnostic criteria that they use for developmental dysplasia of the hip, and treatment approaches to patient scenarios of different ages. RESULTS: Most of the participants recommended universal screening at the age of 4 weeks. It was observed that the most significant physical examination finding was limited hip abduction, and the most frequently used radiographic evaluation on x-ray was acetabular index measurement. The most frequently used description for dysplasia was found as acetabular index >30°. CONCLUSIONS: Although there are some differences among orthopedists in the diagnosis, treatment, and follow-up approach of developmental dysplasia of the hip, there was no significant difference according to the experience-based grouping. The treatment algorithm, which was created with the most frequently given answers, was designed, which we think may be beneficial for pediatricians and orthopedists.

Fracture resistance of resin endocrowns with and without fiber reinforced composite base material: A preliminary study.

OBJECTIVE: The aim of this study was to investigate the effects of fiber-reinforced composite base material on fracture resistance and fracture pattern of endodontically treated maxillary premolars restored with endocrowns using two different resin nanoceramic computer-aided design and computer-aided manufacturing (CAD/CAM) restorative material. METHODS: Forty extracted sound maxillary premolars with an occlusal reduction of 2 mm above the cementoenamel junction (CEJ) was performed following root canal treatment. Mesial interproximal box was prepared for each tooth at the margin of the CEJ and randomly distributed into four groups (n = 10) as follows: Group A, no resin build-up in the pulp chamber; Group B, 2 mm of fiber-reinforced composite (FRC) build-up (EverX Posterior, GC).; Group C, no resin build-up in pulp chamber; Group D, 2 mm of FRC build-up. Groups A and B were prepared with resin nanoceramic (RNC) consisting ceramic nanofillers (Lava Ultimate 3 M ESPE), while Group C and D were prepared with RNC consisting ceramic nanohybrid fillers (Cerasmart GC Corp). All samples were subjected to 1,200,000 chewing cycles (1.6 Hz, 50 N) and 5000 thermal cycles (5°C-55°C) for artificial aging on a chewing simulator with thermal cycles (CSTC). Samples that survived the CSTC test without being damaged were subjected to a load-to-fracture test. RESULTS: The highest mean fracture strength was found in Group D (936.0 ± 354.7) and lowest in Group A (684.2 ± 466.9). Fracture strength was higher in groups where FRC was used as a base material than plain restorations. However, there were no significant differences between the Lava and Cerasmart groups with and without FRC (p > 0.05). Most of the samples were irreparably fractured under CEJ. CONCLUSION: Using short FRCs as a resin base material did not significantly improve fracture resistance. Cerasmart and Lava blocks had similar fracture resistance and fracture pattern.

Age-dependent differences of the depth of olfactory fossa in children

Abstract Objective: With this radio-anatomical study, we aimed to describe the distribution of the depth of the olfactory fossa based on the Keros classification in the pediatric population in our region and to reduce complication rates by providing normative data. Methods: This was a retrospective study conducted with computed tomography imaging of the paranasal sinuses of 390 pediatric patients referred over a six-year period in Sakarya and Kocaeli University Faculty of Medicine. Patients were divided into 3 groups as 1-6, 6-12, and 12-18 years old. The depth of the olfactory fossa was measured and classified according to the Keros classification. The incidence of Keros asymmetries was also investigated. Results: The distribution of the depth of a total of 780 olfactory fossa according to the Keros classification was 24.7% Keros I, 65.9% Keros II, and 9.4% Keros III. When the groups were evaluated with each other and within each group, it was seen that the prevalence of Keros I type was significantly higher in the first group (p < 0.05), and the prevalence of Keros type II was significantly higher in the second and third groups (p < 0.05). Apart from this, the number of Keros type III increased in the third group compared to the first two groups and showed a statistically significant difference (p < 0.05). Among all patients, asymmetry of the olfactory fossa was detected in 29 patients (7.4%). Although the number of olfactory fossa asymmetry was low in group I, it was not significantly different between the groups (p > 0.05). Conclusion: In our study, high Keros I rate and low Keros III rate in children aged -6 were remarkable. Especially for children under the age of six, questions arise about the validity of the Keros classification. More detailed studies in larger populations, in different ethnicities, and with various age groups are needed. Level of evidence: Level 3.